Industrial Abrasive Blasting
High-production abrasive blasting for large-scale industrial facilities. We achieve SSPC SP-6, SP-10, and SP-5 surface profiles required by industrial coating systems.
SSPC SP-5 • SP-10 • SP-6
We typically get back to you in minutes, to within the hour (M-F).
Industrial Blasting Services • Atlanta, GA
Southeast Commercial Services provides full-spectrum industrial abrasive blasting in Atlanta, GA — from structural steel and tank prep to confined space and power plant surface restoration.
High-production abrasive blasting for large-scale industrial facilities. We achieve SSPC SP-6, SP-10, and SP-5 surface profiles required by industrial coating systems.
SSPC SP-5 • SP-10 • SP-6
Surface preparation of structural steel beams, columns, bridges, and fabricated assemblies. We remove mill scale, rust, and failed coatings to bare metal per AISC and SSPC standards.
AISC • SSPC Compliant
OSHA-certified permit-required confined space entry for blasting inside tanks, vessels, silos, and pits. Full atmospheric monitoring, ventilation, and rescue standby protocols.
OSHA 29 CFR 1910.146
Interior and exterior blasting of above-ground storage tanks (ASTs), underground storage tanks (USTs), and process vessels. Prepared to API 653 and NACE standards for protective coating application.
API 653 • NACE Standards
Complete removal of epoxy, urethane, alkyd, and lead-based coatings from industrial substrates. We handle lead paint abatement in compliance with EPA RRP and OSHA 1926.62 regulations.
EPA RRP • OSHA 1926.62
Scheduled and emergency maintenance blasting for manufacturing plants, chemical facilities, and processing operations. Turnaround-ready crews available for planned outages and shutdowns.
Turnaround • Shutdown Ready
Surface preparation for coal, natural gas, and renewable energy generation facilities. We blast boiler components, turbine housings, cooling towers, and structural steel in active power generation environments.
NERC • FERC Facility Experience
NSF/ANSI 61-aware surface preparation for potable water tanks, clarifiers, digesters, and wastewater infrastructure. We understand the strict containment and environmental protocols required at municipal and industrial water facilities.
NSF/ANSI 61 Aware • EPA Compliant
Full-service industrial surface preparation including abrasive blasting, power tool cleaning, and chemical surface treatment. We coordinate directly with coating applicators to ensure spec compliance from substrate to topcoat.
Coating Applicator Coordination
Commercial & Industrial Facilities Only — No Residential Projects
Need SSPC-compliant blasting for structural steel, tanks, confined spaces, coating removal, or plant shutdown work? Connect with Southeast Commercial Services at (470) 458-2322 to review scope, safety requirements, and scheduling.
Industrial & Commercial Only • Greater Atlanta
Why Atlanta Facility Managers Choose Us
Direct Answer: Since 1991, Southeast Commercial Services has been Atlanta's go-to industrial blasting contractor for facility managers who need SSPC-compliant surface prep, confined space capability, and zero-compromise safety execution.
Founded in 1991, we've completed industrial blasting projects across the Atlanta metro — from Hartsfield-Jackson area industrial corridors to the I-285 perimeter manufacturing belt and beyond.
We carry comprehensive general liability, workers' compensation, and pollution liability insurance. Our bonding capacity and insurance documentation are available upon request for your procurement team.
Our crews understand the difference between SP-6, SP-10, and SP-5 — and why it matters for your coating system's service life. We work to your spec, not ours.
OSHA 29 CFR 1910.146 compliant confined space entry. Full atmospheric monitoring, ventilation engineering, and rescue standby — so your safety manager can sign off with confidence.
We know the industrial landscape — from the Fulton Industrial Boulevard corridor to Gwinnett's manufacturing parks, Cobb County's distribution hubs, and Cherokee County's growing industrial base.
We staff for planned outages and emergency shutdowns. Our project managers coordinate directly with your maintenance and engineering teams to hit your critical path milestones.
Southeast Commercial Services provides industrial abrasive blasting throughout the greater Atlanta metro, including Fulton, DeKalb, Gwinnett, Cobb, Cherokee, Clayton, Henry, and Forsyth counties.
From the industrial corridors along I-20 West and Fulton Industrial Boulevard to the manufacturing parks of Gwinnett County, the distribution hubs of Cobb County, and the growing industrial base of Cherokee County — our crews mobilize fast across the entire Atlanta metro region.
Serving industrial facilities within 75 miles of Atlanta, GA.
Checking service area, schedule windows, containment requirements, or mobilization access?
Call (470) 458-2322
How It Works
Direct Answer: Our 4-step process — Site Assessment, Scope & Spec Review, Mobilization, and Final Inspection — ensures every Atlanta industrial blasting project meets SSPC standards and your coating system requirements.
We visit your facility, assess substrate condition, identify containment requirements, and review your coating spec or work with your engineer to define the blast standard needed.
We provide a detailed written scope of work referencing SSPC/NACE standards, containment plan, safety protocols, and project timeline — ready for your procurement and safety review.
Our crews mobilize with industrial-grade blasting equipment, containment systems, and all required PPE. We execute to spec with daily progress reporting to your project manager.
Final surface profile verification using SSPC-certified inspection methods. We provide documentation for your coating applicator and project records before demobilization.
What matters most on industrial blasting projects? Containment, environmental controls, confined-space procedures, and SSPC/NACE alignment must be built into the scope from the start — not patched in later.
We engineer containment systems appropriate to the project — from shrink-wrap enclosures and negative-pressure tenting to tarping and vacuum-assisted approaches for sensitive environments. We coordinate with safety managers, maintenance leads, and coating applicators so every phase stays aligned with production realities and project specifications.
For lead-containing coatings and regulated waste streams, we follow applicable EPA and OSHA requirements. For tanks and vessels, we implement atmospheric monitoring, ventilation, communication systems, and permit-driven confined-space procedures that support confident sign-off from your internal safety team.
Technical Q&A
Technical answers to common industrial abrasive blasting questions from facility managers and engineers across the Atlanta, GA metro area.
We perform blasting to SSPC SP-6 (Commercial Blast), SSPC SP-10 (Near-White Metal), and SSPC SP-5 (White Metal). The correct standard depends on your coating system's requirements and the service environment. For immersion service or high-performance coatings, SP-10 or SP-5 is typically required. We'll review your coating manufacturer's data sheet and recommend the appropriate standard — or work directly from your engineering spec.
We engineer containment systems appropriate to the project — from shrink-wrap enclosures and negative-pressure tenting to ground tarps and vacuum-assisted blasting for sensitive environments. All spent abrasive and debris is characterized and disposed of per Georgia EPD and EPA regulations. For lead-containing coatings, we follow OSHA 1926.62 and EPA RRP protocols.
Yes. Our crews are trained and equipped for OSHA 29 CFR 1910.146 permit-required confined space entry. We provide full atmospheric monitoring (O₂, LEL, CO, H₂S), forced-air ventilation, communication systems, and rescue standby personnel. We coordinate the confined space permit process with your safety department before entry.
We serve power generation facilities, water and wastewater treatment plants, petrochemical operations, manufacturing plants, food processing facilities, logistics hubs, and other heavy industrial environments. Our crews are built for commercial and industrial scopes where coating system performance, documentation, and safe execution matter.
No. Southeast Commercial Services is strictly a commercial and industrial contractor. We do not take residential requests. That helps protect scheduling, maintain jobsite standards, and keep our crews focused on complex industrial scopes.
Direct Answer: If your facility needs industrial abrasive blasting in Atlanta for structural steel, tanks, confined spaces, shutdown work, or coating removal, Southeast Commercial Services can review your scope and provide a project quote.
Industrial & Commercial Facilities Only — No Residential Projects
Tell us about your substrate, blast standard, containment needs, shutdown window, and coating-system requirements. Our team can review service area, access constraints, safety considerations, and spec alignment before mobilization.
Serving Atlanta, Fulton, DeKalb, Gwinnett, Cobb, Cherokee, Clayton, Henry & Forsyth County
Professional B2B Services Only — No Residential Requests
We provide a comprehensive commercial & industrial sandblasting consultation and detailed price quote that accounts for every measurable surface preparation requirement across your facility. From heavy-scale corrosion removal to precision substrate profiling, our abrasive blasting estimators ensure your project is engineered for coating adhesion, compliance, and long-term performance ROI.
With over 30 years of industrial project history, Southeast Commercial Services delivers a controlled, safety-first experience for plant managers and facility engineers. We specialize in active industrial environments where containment, dust control, and minimal operational disruption are mission-critical.
Whether you need a trusted commercial & industrial sandblasting contractor for a single structural steel package or a multi-phase plant shutdown, you can rely on our team to meet strict SSPC/NACE standards while exceeding your EMR safety ratings and surface prep specifications.
Call us Now to Set Up a Free On-Site Walk Thru & Quote
Click to Call & Schedule Your Assessment & Quote
Serving the entire Metro Atlanta area including Buckhead, Midtown, Fulton Industrial Blvd, and the I-85 NE Corridor.
Need a quote for a commercial or industrial painting project? Reach out today and tell us what you need.
We work with commercial & industrial sites & facilities throughout Greater Atlanta.
Use the form below and a team member will follow up.