We typically get back to you in minutes, to within the hour (M-F).
Since 1991, Southeast Commercial Services has lined and recoated storage tanks for facility managers, plant engineers, and municipal operators across Atlanta, Gainesville, Athens, and the surrounding industrial zones. A tank lining is not paint — it is the containment barrier between your stored product and the steel or concrete around it. We specify and apply linings that stand up to chemical attack, potable-water compliance, fuel immersion, temperature cycling, and decades of continuous service.
Direct Answer: Why does the tank lining matter? A failing interior lining contaminates product, exposes the substrate to corrosion, and raises compliance and outage risk. A spec-matched lining with verified prep restores containment, extends service life, and reduces emergency shutdowns.
When inspectors, auditors, or safety officers evaluate your storage infrastructure, the interior lining is what they scrutinize. A sound lining signals operational discipline, regulatory compliance, and asset stewardship — to regulators and to your own operations team.
A compromised lining doesn't just discolor stored product. It lets corrosion attack the steel or concrete beneath it, accelerates structural degradation, and creates liability exposure. That's why we treat industrial tank lining as a containment-engineering discipline — a critical barrier that protects your product, your asset, and your operation from catastrophic failure.
Direct Answer: Why do tank linings fail early? Most failures trace to poor adhesion, pinholes/holidays, or a lining chemistry mismatched to the stored media and temperature. We prevent it with verified prep, spec-driven application, holiday detection, and cure control to the data sheet.
Direct Answer: What lining systems does Southeast install? We specify and apply the full range of industrial tank lining and containment coating systems — matched to your stored media, substrate, service temperature, and regulatory requirements. NSF-61 potable-water epoxies, chemical- and acid-resistant linings, fuel/petroleum linings, polyurea, and vinyl-ester systems are common examples; if your tank needs a system not listed, we spec it and apply it to the manufacturer's data sheet.
We specify and apply the full range of industrial tank lining and containment coating systems — matched to your stored media, substrate, service temperature, and regulatory requirements. Whatever your tank and stored product require, we spec the right system for it.
Not all tank linings are created equal. What performs in a potable water tower will fail in a sulfuric acid tank. What holds in a fuel depot won't meet NSF-61 for drinking water. Chemistry selection is the whole job — so we spec the lining based on what your tank actually holds: pH, temperature range, chemical composition, immersion vs. splash, and regulatory requirements. We don't upsell and we don't cut corners. We spec what contains the product, what lasts, and what keeps you compliant.
Systems we commonly apply include — this is not an exhaustive list:
Direct Answer: How does Southeast prepare tanks for lining? We abrasive-blast or clean to the specified SSPC/NACE level and verify profile and cleanliness, because an adhesion-critical lining only performs on a correctly prepped substrate. Prep methods (SP10/SP6, washing, degreasing) are selected to match the lining data sheet and service environment.
The best epoxy or polyurea lining in the world won't contain anything if the substrate isn't properly prepared. That's why we follow NACE and SSPC standards on every tank — abrasive blasting to white metal (SSPC-SP10), commercial blast (SP6), high-pressure washing, chemical degreasing, and surface-profile verification — matched to the lining system and service environment.
On concrete tanks we add moisture testing, profiling, and crack/joint detailing before the lining goes on. We establish containment zones, protect adjacent infrastructure, and treat every tank interior like the containment vessel it is — whether it's a 100,000-gallon water tower or a 10-foot chemical tote.
Direct Answer: Does Southeast paint and coat silos? Yes. We provide interior and exterior silo coatings for steel and concrete silos — food-grade or abrasion-resistant interior linings and corrosion-control exterior systems — applied with confined-space entry, high-access rigging, and the same spec-driven process as our tank lining work.
Silos take abuse from the inside and the weather from the outside. Bulk material abrades the interior wall, condensation drives corrosion at the roof and transitions, and the exterior takes constant UV and moisture loading. A general painter treats a silo like a tall wall. We treat it as a containment-and-corrosion problem with a high-access safety plan.
As your silo painting contractor, we coat and recoat both steel and concrete silos across Metro Atlanta. Interiors get food-grade or abrasion-resistant linings matched to the stored material; exteriors get corrosion-control coating systems that stand up to Georgia's humidity and thermal cycling. Rigging, confined-space entry, containment, and phasing are planned so your silo comes back online on schedule.
Steel or concrete, interior lining or exterior recoat — we scope silos the same disciplined way we scope tanks.
Direct Answer: What should a tank lining scope include? A spec-grade scope defines access, containment, prep standards, the lining system, holiday detection, and closeout so work stays compliant and predictable. Clear scope prevents change orders, contamination risk, and premature lining failure.
Direct Answer: What tanks does Southeast line? We line elevated and ground water tanks, process and wastewater vessels, fuel and chemical storage, sprinkler/fire tanks, silos, and specialty containment — steel and concrete — across Metro Atlanta, with prep, lining, and access planned to keep your site compliant.
From municipal water systems to chemical plants, from fuel depots to food processing, we line and reline storage infrastructure that presents every imaginable containment challenge:
If it holds liquid, gas, or bulk material — and it's made of steel or concrete — we've likely lined one just like it.
Direct Answer: What is tank relining? Relining removes a failed or delaminating interior lining, repairs the substrate, re-establishes the specified prep profile, and applies a new containment lining — restoring service life at a fraction of tank replacement cost.
When an interior lining reaches end of life — pinholing, blistering, disbondment, or chemical breakthrough — relining is almost always more cost-effective than replacing the tank. Whatever system is on your tank today, we strip the failed or existing interior lining, address underlying corrosion and pitting, re-prep the substrate to the specified SSPC/NACE standard, and apply the correct new system engineered for your current service conditions. We are not locked to any one product line — we spec the replacement lining around what your tank stores and the regulations it answers to.
We reline steel and concrete water tanks, chemical and fuel tanks, sprinkler and fire-suppression tanks, process vessels, and other containment structures — regardless of the original lining chemistry. Every relining project includes holiday detection and a DFT walkdown so the restored barrier performs as engineered.
Direct Answer: Is Southeast compliant with confined-space regulations? Yes—our crews follow OSHA 1910.146 entry procedures plus EPA/AWWA/NSF-61 requirements for interior lining work, monitoring, and documentation. We coordinate ventilation, atmospheric testing, rescue standby, and hazmat handling to reduce liability.
OSHA confined-space protocols, EPA tank regulations, AWWA standards, NSF-61 certification — these aren't optional checkboxes on a lining project. They're baked into every tank we touch. From atmospheric monitoring and rescue standby to proper ventilation and hazmat handling, we follow all regulations to the letter.
We handle lead-based legacy coatings, VOC-restricted environments, and potable-water systems according to EPA and state standards. Waste disposal, air monitoring, confined-space entry logs — we document everything. Licenses, bonds, insurance — all current and compliant. Your liability is our priority. We know that.
How do you choose the right tank lining contractor in Atlanta? Verify confined-space compliance, prep standards, lining-to-media compatibility, holiday detection, and documentation for DFT and cure windows. Choose a contractor who plans phasing, containment, and closeout to reduce risk and keep you compliant.
Industrial and municipal tank lining is not a "paint job." It's a controlled containment project with safety exposure, environmental risk, and long-term asset consequences. Use this checklist to compare contractors on what actually determines performance and liability.
If a contractor can't clearly explain these items—or won't put them in the scope—you're not comparing bids. You're accepting risk.
We work exclusively with industrial-grade lining manufacturers whose products meet or exceed AWWA, NSF, and NACE standards. Our application follows manufacturer specifications to the letter — because that's how warranties stay valid and linings perform as engineered.
All materials arrive at your site in original, sealed packaging bearing the manufacturer's name, batch number, and product certification. No substitutions. No shortcuts. No exceptions.
We understand the operational realities of industrial and municipal facilities. Taking a storage tank offline to reline it can disrupt production, cut capacity, or trigger emergency protocols. That's why we tailor the work schedule to your operation.
All lining work is phased and sequenced to avoid delays, minimize downtime, and keep your facility running. Whether that means night shifts, weekend mobilization, or coordinated shutdowns, we adapt to your timeline and your cure-window requirements.
You can count on Southeast to complete your Atlanta industrial tank lining project on schedule, on spec, and with minimal disruption to your operations.
We stand behind every tank lining project with a one-year labor warranty and full manufacturer backing on all lining materials. If there's a defect in workmanship or application, we'll make it right — no questions asked.
Our reputation is built on linings that last 15-20 years, not 3-5. We don't cut corners. We don't rush cure windows. We apply linings the way they were engineered to be applied — because that's how you get containment that lasts.
We specify and apply the full range of industrial tank lining and containment coating systems — matched to your stored media, substrate, service temperature, and regulatory requirements. Common examples include NSF-61 potable-water epoxy linings, chemical- and acid-resistant linings (including sulfuric and other aggressive media), fuel and petroleum linings, polyurea linings, vinyl-ester linings, and high-build epoxy systems — and more. If your tank needs a system not listed, we spec it. Every lining is applied to steel or concrete and to the manufacturer's data sheet.
Both. Tank relining is a core service. We remove failed or delaminating interior linings, repair the substrate, re-establish the specified prep profile, and apply a new lining engineered for your service conditions — restoring containment without the cost of replacing the tank. Relining includes holiday detection and a DFT walkdown.
Yes. We install NSF-61 certified epoxy linings for elevated water towers, ground storage tanks, sprinkler and fire-suppression tanks, and other potable-water vessels, following AWWA guidelines and EPA requirements for drinking-water contact surfaces.
Yes. We line both steel and concrete tanks. Concrete tank lining systems require moisture-tolerant primers, profiling, and crack/joint detailing before the containment lining is applied — we spec and execute the full system for concrete process, water, and wastewater tanks.
Yes. We provide silo painting and protective coating for steel and concrete silos — interior food-grade or abrasion-resistant linings and exterior corrosion-control coatings — using the same confined-space, access-planned, spec-driven approach as our tank lining work.
Yes. We're fully licensed in Georgia, carry general liability and workers' compensation insurance, and maintain confined-space rescue coverage. We follow OSHA 1910.146, EPA, AWWA, and NSF-61 requirements for tank lining projects. When we're inside your tank, we treat your risk profile like it's our own.
When you're evaluating tank lining contractors, you're not just comparing prices. You're evaluating risk — the risk of product contamination, the risk of premature lining failure, the risk of regulatory violations, and the risk of a crew that doesn't understand what a containment barrier has to do.
At Southeast Commercial Services, we've been lining Atlanta's industrial and municipal storage infrastructure since 1991. We've lined potable water towers that serve tens of thousands of residents. We've lined chemical tanks holding media corrosive enough to eat through unprotected steel in weeks. We've relined fuel tanks at depots where a single lining failure could trigger an environmental disaster.
Our reputation isn't built on marketing. It's built on linings that last 15-20 years, on facility managers who call us back for every tank in their portfolio, and on inspectors who see our work and know it was done right.
Whether you need a trusted Atlanta industrial tank lining contractor for a single elevated water tower, a multi-tank chemical storage farm, a silo battery, or a facility-wide relining program, you can rely on Southeast to exceed your technical specs, meet your schedule, and protect your assets for the long haul.
We don't just paint tanks. We engineer the containment barrier that protects your stored product and your operation.
Professional B2B Services Only — No Residential Requests
We provide a comprehensive industrial tank lining consultation and detailed line-item quote covering every measurable requirement of your storage infrastructure. From NACE-compliant surface prep to NSF-61 certified linings, our professional estimators scope your project for containment, compliance, and longevity.
With over 30 years of Atlanta project history, Southeast Commercial Services delivers a seamless experience for facility engineers and municipal operators. We specialize in confined-space lining where zero-contamination standards and regulatory compliance are non-negotiable.
Whether you need a trusted Atlanta industrial tank lining contractor for a single water tower, a chemical storage farm, or a silo and relining program, you can rely on our team to exceed your technical specs and protect your assets for the long haul.
Call us Now to Set Up a Free On-Site Walk Thru & Quote
(470) 458-2322Click to Call & Schedule Your Assessment & Quote
Serving the entire Metro Atlanta area including Buckhead, Midtown, Fulton Industrial Blvd, and the I-85 NE Corridor.
Need a quote for an industrial tank lining, relining, or silo coating project? Reach out today and tell us what you need.
We work with industrial facilities, municipal operators, and commercial sites throughout Greater Atlanta.
Use the form below and a team member will follow up.
